Mr. Paul E : Quite a wonderful expirance learning Revit and thanks to sSix Sigma Synergy fullfiling it
Thanks also to out instructor Mr. Jasim fpr patiently theaching us .
Mr . Nurazmin bin Ahmad : very good class for new staff,and for thouse in the planning department who involved directly in the project . the class was easy to understand and then instructor is very helpful and easy to approach.
Mr ho Shaun hui: I think The Instructer and the staff are very friendly and I am looking forwward to take on more coursees in the future.
Mr. Andysoo: Mr Manish has done an excellant Job guiding me into AutoCad-2D.
Ms Loshini D/o Wasy: Mr Manish has given a perfct guidance throughout the Training sesssions.
Mr. Selva Kumaran Kamachi: I am a AutoCad usr beginner, after enroll to this program, its teach me alot of easy way to use the software. The Trainer is so helpful and very professional. I am fully knowledgeable. Thanks to Manish.
Ms Daphne Tham: The Trainer is very professional and provided very cleear and easy guide to us. and I got to learn the useful tips and knowledge in just 4 days. I am satisfied with this training.
Mr Loh Cheng Lun: Training is good for the Enginnering Student.
Mr. Mohd Zulfatah Bin Mustafa: The Trainer give me very good explanation in teaching . The staff were very useful and friendly. The Trainer/Instructor give me most effective manner in advice on PMP Course.
Mr Abddirahman hassan Deria Jibril: Helpful Lecturer, excellant lecturing method.
Mr. Mansoor Shawky Sobhy Hemaid: All Perfect!
Mr Abderahman Babikar: High Quality Trainer, Well explanation. I am delighted with this centre.
Mr Mustafa Mokhaimer Diab: It was entertaining and very helpful. The Lecture was nice.
Mr. Aljawi Amjad Osamas: It was very useful to me. Thanks for everything.
Mr Goh Shein Hung: Interesting Course even when all of the students completed almost given exercise within a few days, That were planned for the entire course. during which the instructor had to improvise interesting untill the end.
Mr Vicneswaren A/L Kalimuthu: Course was conductedd well and the knowledge and skills were taught in a way that t is easy to follow and understssnd. I am leaving wih improvedd skills and very happy with the coursse. Woth it !!
Mr Le jia Ling: Nic Cad Centre, Tutor: Now I know more about Autocad 2D.
Mr Abd Al Rahman Mohamed Murkaz: Good Teaching method. Overall satidfieed with the Lectures..
Mr. Mustafa Anas Madhat Nazmi: The Course was very helpful and useful. It fulfilled all the architectural aspects needed. Registration was easy and the staff was very helpful. The Instructor had very good Skills towards delivering the Thoughts and the ideas as well as sharing his experience.
Ms Siti Baidurah BT.Usman Arif: I learnt a lot during this training and now I know more about Revit Software, definitetly this will help me during my working.
Mr Khaidir Bin Jaflus: I like to be in this class, I hope that I can play and using this Revit that easily. he is a good teacher.
Mr Mohd Hafioz Hazri Bin Mohd Razali: Information of Trainer is very good, makes me more comfortable to do the works.
Ms Nur Azreen BT Sahabudin: I Can understand fully. Really Helpful.
Mr. Salah Mahammed Abdullah Alesaei: Everything is Excellant.
Mr. Aaron Joshua Culas: Instructor was very good and clearly very experienced. Staff here were very patient, welcoming and extremely friendly. Facilities were also above par.
Mr. Salah Mohammed Abdullah Alesaej: Very Professional way deliver the information. Good Job!
Mr. Thiru balan : very clear and straight to the point , easy to understand
Mr. Abdul rahman Babaker : course well explained , recomened for friends
Mr. Mohammed Abdulsalam : it is very helpful to know how to handel issue in the future
Mr. Muhammmad Hafiz : very conducive environment , instructor is very good
Ms Hebba: It was fun, Interesting & helpful. I really enjoyed the course and i will recommened this Centre to my friends. Thank you so much.
Ms Quresha: Very informative & Interesting in a fun way. Contains a lot of content to digest-great experience with great people!
Mr Siew Beng Keat: Its been a wonderful educational journey especially for a new comer. A good starting ground for a fojndation Course.
Ms Hadil: Interesting and very useful, learn a lot. Thank you.
Ms Reem: Interesting Course, Valuable Information.
Mr. Hairul Mubarak: Very Good Lecturer, will definitely come for another course.
Mr. Mohd Nabhan: Very recommended. Friendly Staff & lecturer. Definitely will come to other course sometime again.
Mr. Muhammad Nizam: I have a good experience during the Class section just try to keep on going.
Mr. Loh Choy Lan: Very helpful instructor and knowledge is very wide and easy to understand. Centre Staff is very friendly.
Mr Daniel Chin: Great Course had learn and big plause to Jitendra Kumar Nayak for giving me a lot of information that i had learned from him. Keep it up.
Mr. Mohamad Izwan: Overall course make me interested in another program course.
Mr. Muhammad Faris: This Course have improved my skill after I graduate.
Mr Ahmad Hazim: This Training program is very excellant, the equipment provide is good. The course also benefit to me for my future in carrier.
Mr. Mohd Zulfadhli: This course is very good for fresh graduate to get the knowlegde about AutoCad Electrical.
Mr. Chow Tiam Shern: Comprehensive and detailed teaching throughout the course.
Mr. Mohd. Herzwan Hamzah: Fantastic instructor. Keep up the Good Job!
Mr. Ashman: Exciting Course, Frinendly Trainer
Mr. Naresh: Very Passionate Lecturer and very knowledgable. very good asset.
Mr. Baruna: The Whole Course was superb, understandable and easy to learn.
Ms. Mariam: All good, the lecturer quite good with the knowledge. learn some tips and tricks.
Mr Muhammad : This two days program are fully practical and not to boared with theory.
Mr. Dilip: The instructor knowledge to the software is good which makes us to clear our doubts.Besides he is also a very patient person
Mr.Mazen: I get Many Advantages from this course and I am so proud to have this Cirtificate from this Institue
Mr. Kasim Hijazi :I enjoyed the course it was really helpfull and intresting , the staff and trainer were really good and very respectful
Ms. Norhafizah: instructor very helpful on the softare and traning content .
Mr. Salah : Great course and great instructor . Everything was excellent.
Ms Noor Hidaya Binti Omar: Intructor good in delivered the content/subject. Participant get more understand the MS Project software and able to gain new/extra knowledge.
Mr Ng Soo Chen: Instructor was friendly & Knowledgeable. Explained well software and how to apply in the actual situation.
Ms Begum Irdawati Binti Dowlad Rahuman: Excellent Training with combination of Good Teachnical Know how & software manipulation not found in books. Recommended for beginners to Staad Pro. The Course gives me confidence to tackle Staad related Projects.
Ms Tay Jing Hui: Good learning experience to prepare me for university. Staffs were friendly and helpful as well.
Ms. Qureesha Ali Omer: Excellent/Gr8 Input - Deserved every penny. It was fun, Interesting & tiring at the same time.Excellant
Mr. Moath ameen Chalabi: Excellent/ It was amazing course, Thank you so much.
Ms Hadil H s Alsafadi: Excellent/ It was a very fruitful experience and fun, thank you for the help & we learned a lot.
Mr. Mohd Jamil Bin Abd Rahman: Excellent/ will join another courses.
Ms. Heba Mohamed Alatta: Excellent/ I really enjoyed the course. Thank You.
Ms Reem Mohamoud Farghali: Excellent Teaching skills, accompanied with patience & extra tips, new creative method of teaching.
Mohd Amir Sharifuddin Bin Mohd Ridzuan: Excellant/This Training is very useful to me help me a lot in getting better understanding about the software.
Mohamed Nabil Bin Mohamed Noordin: Good! Overall I covered most of the important things in MS Project in Timely Manner with help of my Trainer.
Wong Heng Tat: Excellent/ Training class is lively, intractive. Keep it up.
Mohd Faizwan Bin Sohani: Excellent/Good Experience & Good Job.
Ho Shu Ren: Excellent/ Excellent Teaching, Clear Explanation.
Abdu Saib Bin makmun: Good/Good Experience & Good Job.
Lim Al Yin: Excellent/Energy Analysis was clearly explained by Manish(Trainer).
Mohamad Hainil Nizam Md Rosman: The Trainer is Excellant.
Mr. Wang Jen Hui: Excellant/The Instructer was extremely helpful.
Ms. Nur Fathen Nurly Binti Mohd kamil: Excellant/ The Instructer explain very clearly every Topics.
Mr.Mohamed Elimustapha Adam: Trust & helpful Training Centre, we learned a lot and it was fun. Thanks
Good/Excellant learning technique.Very understandable and easy to learn & understand.
The Whole course was very helpful in helping me to better understand how a schedule behaves and tools that are available for use to generate/provide results to suit my needs Never knew so much can be done with Primavera.
Great training, trainer, well explained and there was a proper flow of the training in the class.
Excellent and comprehensive teaching approach throughout the entire training course.
I learnt a lot of things through this course with lecturer Mr. Jiten. It will be good if more course like mold design using solidworks
Overall I am very satisfied and learnt a lot throughout the classes. Had a fun learning experience and the trainer was extremely professional and approachable with any program related questions I had, looking forward to attend other sessions in the near future
satisfied with the classes. Helpful instructors and staffs
Understanding is easy.
Able to understand the explanation
More than I had expected,excellent exercises and material. Broadened the ideas and views about uses of ANSYS program Thank you.
I am really happy with this ANSYS course. All my problems during modeling of structures already answered perfectly.
Instructor was well prepared and fun made the learning process fun.
MOHAMED AHMED ABDALLA ELSAIED- The course is helpful a lot in the career future. The instructor really shows us the simple and easy way to create project and design it.
ELYAS MOHAMMED ELYAS ABDULRAHMAN- The course was really good,the instructor was doing great and best performance. The staffs were very kind and the treatment was excellent.
AABDULRAHMAN ADAM ISMAIL HAMED-I have enjoyed the course. All staffs are friendly and helpful. The facility is clean and tidy and I am really feeling satisfied of going through that course.
SAYED MUHAMMAD IZZUDDIN SYED HUSIN-AutoCAD Electrical is a very good course.
ELTAYEB ABUZAR ELTAYEB ELTIRAIFI- The course was clear, simple and fun. The instructor is well trained and explained well about the course.
ABDUL MUTALIB – I love this course. The trainer is excellent in teaching. SUPERMAN! Save the world 100% crazy.
OMAN HAMZU-TheCourse was creative and joyful also it was very educative and interesting.
"Very detail explanation on theory & practical, much much more than expectations."
"Time was managed well and information was delivered clearly."
Muhammad Fawwaz Zullkefle: "Systematic Method of Teaching. Helpful and Friendly Instructor, Concise and cover areas related to job industry. Good Service is even extended even after the course ends. Excellent!"
Mohammad Hamdan Nin: "Everything is good valuable & Excellent!"
Mohd Fazil: "Very Helpful. Very good class for improvement our skill"
Nurisma: "Good to learn here. Systematic, overall is Good."
"Very Good Instructor with nice and Friendly environment, Thank You!"
Excellent trainer, Excellent Facilities, Keep up the job.
Learned how to transform a 2d drawing into 3D architecture which will be definitely helpful for my near future as an engineer. The instructor was very prepared and professional in handling any issues and troubles I faced.
"Best Instructor I have ever had."
"Very Good Knowledge obtained on the Functions and operation of the software. Explanation was done in a very good way and easy to understand. Topics covered were beyond the syllabus."
" Great Job, Understand everything"
"Excellent instructor Mr. Manish. Well prepared & professional"
This program was conducted very professionally and I am satisfied with everything that was taught. It was an wonderful experience and really a great motivation for me. I believe that this program should be made more available to both the younger generation and students of other educational background.
Course was run in very interactive manner.
Excellent guide and understood the entire course work. Very good teacher.
Lecturer was amazing and has an amazing personality and amazing teaching abilities. I extremely recommend others to take courses with him.
Excellent guide and understand the entire course work.
"Very good Tutor, Gave a very comprehensive course and learned so much in such a time frame. Ethusiatic and Patient tutor."
"Provided example drawing in training, which is more complicated and trainer shows how to tackle the hard issues."
Knowledgable tutor with highly experienced in field really important in software application
Nice teaching :)
Mr. Manish was well prepared & patient with his explanations & teaching methods. Completeing the course with full Revit Architecture
I would recommend to my Friends.
Very good and fruitfull training, A lot of knowledge through this training gained!
Trainer was very professional & knowledge about MS Project. Also his work environment experience was very good and helped us a lot to understand the application of the software
MOHAMED ELFATIH MOUSTAFA- The lecturer is quite good and friendly. He is always well prepared and helpful. The assignments provided were very useful and cover all the basic features.
MOHAMED AHMED- The instructor was very helpful.
AZRULHAFIZ- Everything was good and I love it.
MOHAMED MUTASIM MOHAMED ELHAJ- The lecturer is very humble, funny with us, take his time with us and make sure everyone understand the assignments and how to do it.
MURAD ABDULLAH MOHAMMED- It was more than clear…
GAFAR ALIM ALI- The instructor’s explanation was very helpful and clear. In fact , I liked the way he uses to deliver the information.
AHMED ALI AHMED SALLOM- The instructor was good and the class was interesting to be attended. It was a great time to be here.
the knowledge is very helpful for my job.
It was good and understandable. It is helpful towards my future, and my instructor was professional and clear
By the end of this course it was really a nice experience and helpful thank you..
Enjoyed as well as learnt a lot and will recommend to friends about this centre and provided courses.
"I have the confident to work on Primavera, Thanks to my trainer!"
I have expanded my knowledge on how to use Autocad Electrical.Thank you
The instructor taught in an easy way to remember. Excellent…
The instructor was being patient and very well prepared. I would highly recommend this training centre especially Mr.Jiten. Thank u so much.
Learn a much from Autocad 3D and really impresses ! like it !
Very good and easy to draw an object by using Autocad 3D.
" The trainer has very good experience in the industry and was able to share with us work and industry related issues. This is very beneficial to the students. The Trainer has given more than what is expected."
"It was excellent ideas given by Mr. Manish, and I would like to thank the Centre helped me."
"It was really good course and really I had a lot of things to know. Thanks a lot!"
" Excellent kind of training centre. Need for Industrial and R&D sector. The trainer is equipped with excellent and outstanding knowledge in ANSYS and Solidworks."
" Thorough explanation throughout the course! Excellent and very knowledgeable lecturer or Instructor. "
"Trainer given a full effort in explaining every topics. Trainer has very good knowledge in Primavera also experienced. I would recommend my friends and coligue to join training at Six Sigma Synergy"
"Scope of Syllabus covered fully & well explained too. Excellent services to the students. Keep up the good work!"
"Easy to learn and understand, good examples given. Keep it up!"
"This Training course is must helping me on my post. A lot of Knowledge have been given during MS Project Course. Instructor was well prepared & willing to share his experience. Will recommend friends to join this MS Project course. Thank you very much to Six Sigma Synergy."
"I am feeling that I have learnt all basic Primavera Functions. Thanks to your effort."
The ANSYS course was practically trained by excellent trainer and highly recommend to others.
The instructor took extra effort to explain and teach me in detail sections which concerns my work area. This has helped me to fully understand and utilise the Solidworks functions and features. Instructors tips and tricks to make using Solidworks easier are also valuable.
“A great course which in a great value for money “
“The instructor has thorough knowledge in the course and paid attention to his students. Made every individual got what they are there for. He made the learning environment comfortable for everyone which is vital for students in order for them to understand. The staffs are very welcoming and always available for any inquiry”
“The course has been tailored well to accommodate students from various backgrounds supporting each individual in the mastery of the system. In addition assists the participants to harness their creative skills. The instructor has supported as well in not only understanding the system but helping us with other soft skills.”
“Instructor explained well throughout the entire class”
“Came in without a single knowledge of Ansys workbench. Now all prepared and excited to explore further into the field of CAE. Thank you Mr. Jiten, Ms. Rohini and rest of the staff from CADD CENTRE for all the knowledge, help and support”
“Good Communication, the instructor taught us step by step without fail”
“The class instructed by the instructor was very enjoyable and insightful. Hope to be taught by him for other training programs in the near future”
The Class was useful I learned many things it was perfect. I enjoyed in Mr. Jiten class.
It was really useful for me the lecture has a perfect experience. Knows how to make sure his students understand the subject in an easy way.
I really appreciate every single knowledge I gained from Mr. Jiten he made me clear on how to use and operate AutoCAD effectively and efficiently. I will recommend my friends who are interested in learning AutoCAD in a Professional way to come here
I enjoyed the class, the instructor was really helpful in conclusion, I feel the class was worthy. I am happy that I managed to learn something new. Thank you for teaching us and for your patient.
Taking up the autocad 2d course at the caddcentre, has been I believe a very enjoyable experience. The instructor professionally addressed the lectures while keeping the learning environment fun and relax. I cant end, without expressing my gratitude towards the staffs who has been very helpful and patient.
Throughout the training, the trainer with effective way of explaining cleared all my doubts, showing the efficient tricks to tackle effortlessly coming difficulties usually encountered by students, overall being trained was a good experience, and I am able to apply what I have learned in the real life.
Rreally the class was very good and also the trainer for the cad and we got more knowledge from the teacher as he explained good.
I enjoyed throughout the course. Although I had autocad 2d background in my university curriculum, this course helped me in improving my skills in autocad 2d. Lastly the trainers are the best at what they are doing
This autocad training is really good because I can get more knowledge and learn something new. Most of the subject is very useful so I can apply it at my workplace.
“ I got a good knowledge in this autocad training, it was really usefull.I hope to complete the other courses.
During my training at the caddcentre, the trainers were excellent and cleared all of my doubts . Excellent explanation made throughout my whole duration of the class. Overall satisfied.
During my Learning journey towards the Master Diploma in CADD CENTRE, Malaysia, I’ve been welcome in a beautifully way, felt as in own Family given tremendous support from the staff and the Course Material are very helpful to me. My respectful thanks to all Cadd Centre Staff. Civil Engineering – UTM Student Completed Master diploma in Architectural CADD
"I like the quality of work and the centre understanding also clean faculty..." COURSE: Primavera Trainer: NikhilRaj.KN
"Trainer sharing a good & easy method to using autocad, which help me to learn more fast & efficient. The command method is very helpful and I am so happy, overall its very good and satify COURSE: Autocad 2d Trainer: Imran
"Even I've one year of experience with Autocad, I still find I've learn a lot during these classes. The learning criteria is very well planned and the course is also suitable for starters (first timers) COURSE: Autocad 2d Trainer: Imran
"Overall education is good, Trainer give full support and willing to teach any doubt when we ask question. Overall I am satisfied with trainer, skill shown" COURSE: Autocad 2d Trainer: Imran